Using The Key Operator Programs - Sharp AR-FX10 Operation Manual

USING THE KEY OPERATOR PROGRAMS

Follow these steps to configure the settings in the key operator programs.
1 Press the [CUSTOM SETTINGS] key.
Touch the [KEY OPERATOR PROGRAMS]
2
key.
DISPLAY
LIST PRIN
CONTRAST
ADDRESS
RECEIVE MO
CONTROL
KEY OPERATOR PROGRAMS
3 Use the numeric keys to enter the five-digit
key operator code number.
KEY OPERATOR CODE
I I I I Supplementary explanation of key operation for key operator programs
KEY OPERATOR PROGRAMS
FAX DEFAULT SETTINGS
A
DEFAULT DISPLAY SETTINGS
MUST INPUT NEXT ADDRESS
B
KEY AT BROADCAST SETTING
OWN NUMBER AND NAME SET
A When a key that appears in the form
B Check mark boxes are touch keys that show the status of selections. A box with a check mark means the
function is "on" (enabled) and an unchecked box means the function is "off" (disabled). The on/off status
changes each time the box is touched.
C If the settings continue on the following screen(s), touch the
the screens. To return to the category selection screen, touch the [OK] key.
D The currently set numerical value is displayed.
E Numerical values can be set by touching the
For the factory default
setting for the key
operator code number,
see page 3 of the key
operator's guide.
THE NUMBER OF DIRECT ADDRESS
KEYS DISPLAYED SETTING
INITIAL RESOLUTION SETTING
XXX
4 Touch the [FAX SETTINGS] key.
OPERATION
DEVICE CONTROL
SETTINGS
N/W SCANNER
FAX SETTINGS
SETTINGS
PRODUCT KEY
5 Select the desired program and configure
the setting.
Page 8-2 shows the programs that can be selected.
The settings for each of the programs are explained
on the following pages.
6 Press the [CA] key to exit the program.
The following types of entry keys may
appear in the screens.
OK
1/3
6
C
is touched, the setting screen of that key will appear.
and keys to move back and forth through
and keys.
KEY OPERATOR PROGRAMS
(1 15)
15
D E
8
8-3