Table of Contents
Advertisement
KEY OPERATOR PROGRAMS
Transaction report print select setting
This program is used to select the condition for
printing a transaction report. The condition is set
separately for normal transmission, broadcast
transmission, reception, and confidential reception.
SINGLE SENDING
PRINT OUT ALL REPORT
PRINT OUT ERROR REPORT ONLY
NO PRINTED REPORT
Touch the
key to display the next two settings. Select the
print conditions for receptions and confidential receptions.
RECEIVING
PRINT OUT ALL REPORT
PRINT OUT ERROR REPORT ONLY
NO PRINTED REPORT
The normal settings are indicated by shading
above.
Remote reception number setting
(only when extension phone is connected)
When a call is received (not made) on an extension
phone connected to the machine, fax reception can
be activated by entering a one-digit number and
pressing "
" twice on the phone's keypad. This
number is called the remote reception number, and
you can set it to any number from "0" to "9". The
number is normally set to "5".
ECM
(This setting is only effective if the other machine
is a G3 machine that supports ECM)
Line
conditions
can
transmitted
fax
image.
Correction Mode) is turned on, pages that are
distorted are automatically re-transmitted. This
setting is initially turned on. If turned off, distorted
images will be transmitted without being corrected.
NOTE
If the other machine supports Super G3, ECM will
function regardless of the setting.
8-6
BROADCASTING
PRINT OUT ALL REPORT
PRINT OUT ERROR REPORT ONLY
NO PRINTED REPORT
CONFIDENTIAL RECEPTION
PRINT OUT NOTICE PAGE
NOT PRINT OUT NOTICE PAGE
sometimes
distort
a
When
ECM
(Error
Activity report print select setting
This program is used to have the activity report
stored in the machine's memory printed out at
regular intervals.
You can choose to have the report automatically
printed
each
time
transactions exceeds 99, or have the report printed
at a specified time every day (only once per day).
The report is normally set to not print out. Select
"AUTO PRINT AT MEMORY FULL" to have the
report automatically printed when the number of
stored transactions (the combined total of
transmissions and receptions) exceeds 99.
If you select the "PRINT DAILY AT DESIGNATED
TIME" checkbox, "HOUR" and "MINUTE" keys will
appear to the right to let you specify the time.
KEY OPERATOR PROGRAMS
ACTIVITY REPORT PRINT SELECT SETTING
AUTO PRINT AT MEMORY FULL
PRINT DAILY AT DESIGNATED TIME
Touch the "HOUR" and "MINUTE" keys and then set the
hour by touching the
in the same way. When finished, touch the [OK] key.
NOTES
G If you only select the "PRINT DAILY AT
DESIGNATED TIME" setting and the number of
recorded transactions exceeds 99 before the
specified time, each new transaction will delete
the oldest transaction (the oldest transaction will
not be printed).
G The activity report can also be printed out manually
(see "PRINTING OUT SETTINGS" on page 8-12).
the
number
of
stored
OK
HOUR
MINUTE
13
01
and
keys. Set the minute
Advertisement
Chapters
Table of Contents
