Storing One-Touch Keys - Sharp AR-FX10 Operation Manual

STORING ONE-TOUCH KEYS

Follow the steps below to store a one-touch key after you have completed steps 1 through 4 on page 6-2.
1 Touch the [NAME] key.
DIRECT ADDRESS / INDIVIDUAL
NAME
INDEX FAX
KEY NAME
screen appears. Enter up to 36 characters for the
name.
Refer to page 6-15 for the procedure for entering letters.
2 Touch the [INITIAL] key.
INITIAL
MODE
Touch a letter key.
3
DIRECT ADDRESS / INDIVIDUAL
INITIAL
NOTE
The initial you enter here determines the position of
the one-touch key in the ABC index. For information
on the ABC index, refer to
4 Touch the [OK] key.
NEXT EXIT
OK
OTHER
5 Touch the [INDEX] key.
NAME SHARP CORPORATION
FAX No
INDEX
KEY NAME
STORING, EDITING, AND DELETING AUTO DIAL KEYS AND PROGRAMS
The "No." that
automatically appears is
the lowest number from
001 to 500 that has not
yet been programmed.
When [NAME] is
touched, the letter-entry
The first letter (initial) of
the name entered in step
1 is initially selected and
is highlighted. If you
wish to change the
letter, touch a different
letter key.
Index keys on page 1-5.
5
6 Touch an index key.
DIRECT ADDRESS / INDIVIDUAL
INDEX
SELECT THE CUSTOM INDEX WHERE YOU REGISTER THIS ADDRESS.
USER 1 USER 2 USER 3
DO YOU REGISTER THIS ADDRESS AT THE [FREQUENT USE], TOO?
YES
G Select one of the upper row of keys ([USER 1]
through [USER 6]) to determine the location of the
one-touch key when the GROUP index is displayed
instead of the ABC index (refer to page 1-5).
G The lower keys are for selecting whether to include
the one-touch key in the [FREQUENT USE] index.
G If you touch the wrong key, simply touch the
correct key.
7 Touch the [OK] key.
8 Touch the [FAX No.] key.
CORPORATION
FAX No.
MODE
9 Use the numeric keys to enter the fax number.
DIRECT ADDRESS / INDIVIDUAL
FAX No.
ENTER THE FAX No. VIA THE 10-KEY PAD, THEN PRESS [OK].
0666211221
To insert a pause between digits of the number, touch
the [PAUSE] key. The pause appears as a hyphen "-".
Refer to "Pause time setting" on page 8-5 to set the
duration of the pause.
If you make a mistake, press the [C] key to clear one
digit at a time, and then enter the correct digit(s).
If you are not going to enter a sub-address and
passcode after the fax number, proceed to step 12.
NOTES
G For information on sub-addresses and passcodes,
see "TRANSMISSION BETWEEN MACHINES
SUPPORTING F-CODES" on page 4-2.
G A maximum of 64 digits can be entered, including
the fax number, sub-address, passcode, any
pauses (hyphens), and slashes "/" (to separate the
sub-address and passcode).
NEXT EXIT
OK
USER 4 USER 5 USER 6
NO
The fax number entry
screen appears.
NEXT EXIT
CANCEL OK
PAUSE
SUB ADDRESS
6-3
6