Optional Transmission Settings; Original Size - Sharp MX-B201D Operation Manual

OPTIONAL TRANSMISSION
SETTINGS
There are several transmission settings that you can make before dialing and transmitting an original.

ORIGINAL SIZE

The original size can be set to "A4", "8.5x11", or "8.5x14". The setting is only effective for one transmission.
If desired, you can set a fixed original size that remains in effect for all transmissions.
1
Press the [MENU] key.
2
Press the [ ] key (
until "4:USER PROGRAM" appears,
and then press the [OK] key.
Selection
"4:USER PROGRAM"
3
Press the [ ] key (
until "1:DOC. GLASS SIZE" appears,
and then press the [OK] key.
Selection
"1:DOC. GLASS SIZE"
To set a fixed original size for all transmissions:
Press the [ ] key ( ) or [
"2:FIXED DOC. SIZE".
To temporarily change the original size
Note
setting when faxing from the document
glass, use the "1: DOC. GLASS SIZE"
setting. To change the permanent original
size setting, use the "2: FIXED DOC. SIZE"
setting.
) or [ ] key ( )
) or [ ] key ( )
] key ( ) to select
4
Press the [ ] key (
to select the original size.
5
Press the [OK] key.
6
Press the [MENU] key.
) or [ ] key (
The selections are as
follows:
1:A4
2:8.5x11
3:8.5x14
Press the [MENU] key to
exit.
51
)