Convenient Dialing Methods - Sharp AR-FX10 Operation Manual

CONVENIENT DIALING METHODS

The fax function includes a convenient auto dial feature (one-touch dialing and group dialing). By programming
frequently dialed numbers, you can call and send documents to these locations by means of a simple dialing
operation (refer to page 2-3). There are two types of auto-dialing: one-touch dialing and group dialing. To program
auto-dial numbers, refer to pages 6-3, 6-6.
G One-touch dialing
Simply press a one-touch key and then press the [BLACK
COPY START] key to dial the programmed location. A
name of up to 36 characters can be programmed for the
location (a maximum of 18 characters are displayed).
When using F-code transmission, a sub-address and
passcode can also be programmed (refer to page 4-2).
G Group dialing
Multiple one-touch dial locations can be programmed into
a single one-touch key. This is convenient for successively
sending a document to multiple locations.
• Full fax numbers entered with the numeric keys cannot
be stored in a group key. First program the number in a
one-touch key and then store it in a group key.
G Redialing
The machine keeps the last fax number dialed with the
numeric keys in memory. You can redial the last number
dialed by simply touching the [REDIAL] key.
G On-hook dialing
Touch the [SPEAKER] key, listen for the dial tone through
the speaker, and then dial.
• Faxes must be sent manually when using on-hook
dialing. (Refer to page 5-2.)
• On-hook dialing is not possible using a one-touch key
that includes a sub-address and passcode, or a group
key.
NOTES
G A total of 500 one-touch dial and group keys can be programmed. (Refer to page 6-2.)
G Programmed one-touch keys and group keys are stored on "index cards". A one-touch key or group key can be
easily accessed by touching the index key. (Refer to
G To prevent calling or sending a fax to a wrong number, look carefully at the touch panel and make sure you
program the correct number when programming an auto-dial number. After storing a number, you can also print
out the stored number (refer to page 6-14) to make sure it was stored correctly.
No.001:SHARP CORPORATION
0666211221
SHARP CORPORATION
SHARP GROUP
FREQUENT USE
Touch the [ADDRESS DIRECTORY] key in
the initial screen to display the above screen.
No.005:SHARP GROUP
GROUP:025
SHARP CORPORATION
SHARP GROUP
FREQUENT USE
Touch the [ADDRESS DIRECTORY] key in
the initial screen to display the above screen.
AKER
Y:100%
EPTION
SPEAKER
FAX MEMORY:100%
AUTO RECEPTION
on page 1-5.)
5
CORPO.TPS
ABCD EFGHI JKLMN OPQRS
CORPO.TPS
ABCD EFGHI JKLMN OPQRST
REDIAL
ADDRESS
DIRECTORY
SUB ADDRESS
RE
ADDR
DIRE
SUB
1-11
1