G Editing And Deleting A Memory Box; Printing Programmed Information; Editing And Deleting A Memory Box - Sharp AR-FX10 Operation Manual

PROGRAMMING, EDITING, AND DELETING F-CODE MEMORY BOXES

PRINTING PROGRAMMED INFORMATION

EDITING AND DELETING A MEMORY BOX

1 Press the [CUSTOM SETTINGS] key and
then touch the [ADDRESS CONTROL] key
(refer to steps 1 and 2 on page 6-2).
2 Touch the [F-CODE MEMORY BOX] key.
(refer to step 2 on page 6-10)
3 Touch one of the memory box keys
([POLLING MEMORY], [CONFIDENTIAL],
or [RELAY BROADCAST]) on the amend/
delete line (lower line) (see step 3 on page
6-10).
4 Touch the memory box key that you wish
to edit or delete.
MEMORY BOX / AMEND/DELETE
SELECT MEMORY BOX TO AMEND/DELETE.
POLLING MEMORY
MARKETING GROUP
G The memory box edit/delete screen appears.
G (
) mark indicates that data has been stored.
G A memory box cannot be edited or deleted when data
is stored in the box.

PRINTING PROGRAMMED INFORMATION

You can print out lists of the One-touch keys, Group keys, Programs, Memory boxes that have been stored in the
machine.
1 Press the [CUSTOM SETTINGS] key.
2 Touch the [LIST PRINT] key.
Y
LIST PRINT
ST
S
RECEIVE MODE
L
NOTE
If you attempt to print a list when no data exists, a warning message will appear.
6-14
EXIT
FAX INFORMATION
5 Touch the keys as needed to edit or delete
the information.
F-CODE MEMORY BOX / POLLING MEMORY
No.005
BOX NAME MARKETING GROUP
SUB ADDRESS 22233311/351212
POLLING TIMES
UNLIMITED
G Edit a memory box in the same way as you
programmed it.
G To delete a memory box, touch the [DELETE] key
at the upper right of the screen (a message will
appear asking you to confirm the deletion).
G The print PIN must be entered to edit or delete a
confidential memory box.
G A memory box cannot be edited or cleared while it
is being used for transmission.
3 Touch the [SENDING ADDRESS LIST
(FAX)] key.
PRINTER TEST PAGE
SENDING ADDRESS LIST(FAX)
Touch the key of the list you wish to print.
4
GS
S LIST(FAX)
INDIVIDUAL
GROUP LIST PROGRAM LIST
LIST
MEMORY BOX
LIST
DELETE EXIT
Printing begins.
To cancel printing after it
has begun, touch the
[CANCEL] key in the
message screen.