Sharp AR-FX10 Operation Manual page 13

Facsimile expansion kit for ar-c262m
Table of Contents

Advertisement

[ORIGINAL] key (page 1-8)
11
Touch this key when you wish to manually set the
size of the original to be scanned or scan both
sides of the original.
[RESOLUTION] key (page 1-9)
12
Touch this key to change the resolution setting for
the original to be scanned. The selected resolution
setting will be highlighted above the key. The initial
factory setting is [STANDARD].
I I I I Address directory screen (alphabetically ordered)
The screen below appears initially when the address directory is set as the initial screen using "Default display
settings" (page 8-4) in the key operator programs.
1
One-touch key display
1
This shows the one-touch keys that have been
stored on the selected "index card". The key type is
indicated by the icon at the right. One-touch keys in
which a fax number is stored are indicated by a
"
" icon. The display is initially set to show 8 keys.
This can be changed to 6 or 12 using the key
operator program. (See "The number of direct
address keys displayed setting" on page 8-4.)
Display switching keys
2
In cases where the one-touch keys cannot all be
displayed on one screen, this shows how many
screens are left. Touch the
through the screens.
[CONDITION SETTINGS] key
3
This displays the condition settings screen (previous
page), which is used to set various conditions.
NOTE
The screen shown above is the alphabetical address directory. If desired, the initial screen can be set to the group
address directory (refer to "Default display settings" on page 8-4).
READY TO SEND.
A
B
C
D
E
F
G
H
FREQUENT USE
ABCD
EFGHI
5
keys to move
A LOOK AT THE OPERATION PANEL
[EXPOSURE] key (page 1-10)
13
Touch this key to change the exposure setting for
the original to be scanned. The selected exposure
setting will be highlighted above the key. The initial
factory setting is [AUTO].
Special function icon display (page 6-2 of
14
"Operation manual (for general information
and copier operation)")
When a special function such as polling or dual
page scan is selected, a special function icon
appears here.
2
SPEAKER
REDIAL
CONDITION
SETTINGS
SUB ADDRESS
ADDRESS REVIEW
UVWXYZ
JKLMN
OPQRST
ABC
[ABC
GROUP] key (page 6-9)
4
Touch this key to switch between the alphabetical
index and the group index.
Index keys (page 6-9)
5
One-touch key destinations are stored on each of
these index cards (alphabetical index or group
index). Touch this key to switch between the
indexes.
Group indexes make it possible to store one-touch
keys by group with an assigned name for easy
reference. This is done with the custom settings
(refer to pages 6-3 and 6-9). Frequently used
one-touch key destinations can be stored on the
[FREQUENT USE] card for convenient access.
3
GROUP
4
1
1-5

Advertisement

Table of Contents
loading

Table of Contents