Getting Started
Running a Session Configuration
Desktop Icon
TeemTalk Menu
Command Line
Option
12
Running a Session Configuration
You can run a TeemTalk session configuration using one of the
following methods.
If a desktop icon was created for the session configuration, double-
clicking on it will automatically run TeemTalk and cause it to load
the settings contained in the session configuration file.
To run a session configuration file while TeemTalk is running, run
TeemTalk either by double-clicking on the
on the desktop, or from the
>
HP
HP TeemTalk Terminal Emulator
menu and select
File
.tts session file then click
The command line for running the TeemTalk executable file can
include a command to load the settings stored in a specified session
configuration file. The format of the command is as follows:
+lsf"sessionfile.tts"
The filename must include the extension .tts and must be enclosed
within double-quote characters. The command must be preceded by
a space to separate it from the name of the TeemTalk executable file
or other command line options.
For example, to run TeemTalk and load the settings stored in the
session configuration file mysettings.tts, you would enter the
following on the command line:
teemtalk.exe +lsf"mysettings.tts"
Refer to the chapter "Command Line Options" on page 275 for more
information on command line options.
menu by selecting
Start
>
TeemTalk
. Select the name of the required
Open Session
.
Open
icon displayed
TeemTalk
All Programs
, then display the
>