HP NAS 8000 System and Hardware Upgrades
4. Power up the system in this sequence:
Using Command View NAS, you can install and enable HP OmniBack II v4.1
backup agent software for local backup.
Firmware Upgrades
For instructions for upgrading firmware, see your tape library documentation.
222
— NAS server connected to tape libraries via the FC fabric.
Note: NAS 8000 servers can share the same tape library with other
components on the SAN. However, the tape changer must be controlled
by a server other than the NAS 8000.
— UPS
— Library
— Array
— Server