Using Legato Networker; Networker For Windows; Networker For Unix - HP StorageWorks 8000 - NAS User Manual

Integrating with Network Backup Applications

Using Legato NetWorker

NetWorker is a network based, backup and recovery tool.
You can use NetWorker on either a Windows NT or UNIX system connected to
your NAS server.
Note:
the NAS server.

Networker for Windows

1. Select Start > Programs > Networker Group > Network User.
2. Select Backup.
3. Expand the network and find the NAS server. Expand the volumes. You can
4. Select the files, directories, or volumes you want to back up.
5. Select your backup options as you normally would, then start the backup.

Networker for UNIX

Before you can backup with Networker, you must:
To back up files from the NAS server using Networker for UNIX:
1. Execute /opt/networker/bin/nwbackup.
2. Select Backup, Archive, & Restore.
3. Click Select for Backup.
4. Expand the network and find the NAS server. Expand the volumes. You can
5. Select a volume and click Backup > Start Backup of selected files and
200
When you back up with a remote server, you cannot use a tape device local to
only back up Windows shared volumes that have been mapped to the backup
server.
Mount on your local host machine the NAS server volumes you want to back
up.
Configure the NAS server so that the UNIX backup system is set to a trusted
host on the NAS server.
only back up NFS mounted volumes.
directories.