Disaster Recovery File Settings - HP StorageWorks 8000 - NAS User Manual

Configuring Your System and Network

Disaster Recovery File Settings

The disaster recovery file (DRF) contains all the information necessary to rebuild
the NAS server and storage array configuration from the point in time when the
system created the DRF.
You can specify how often this file is created:
1. In Command View NAS, click the Configuration tab.
2. Navigate to Disaster Recovery File.
3. Select Actions > Edit File Interval.
4. Set the interval, then click OK.
Note:
short interval so that the DRF always reflects the current setup. When your system is
stable, you can increase the interval to reduce the overhead required to update this file.
For details on using the DRF, see
98
While you are setting up your NAS system, we recommend you use a relatively
Recovering from a Disaster on page 175.