Managing Your Storage
Managing a User Default Quota
To edit User Quotas - Default settings:
1. In Command View NAS, click the Storage tab.
2. Under File Volumes, select Quotas.
3. Expand the desired file volume.
4. Select User Quotas - Default.
5. Select Actions > Manage User Default Quota.
6. Either check the No Space Limit box, or uncheck the box and type in values
7. Set the grace period in increments of days, hours, or minutes.
8. Click OK to save the changes.
Note:
period applies to both the default user settings and each user.
Adding a User Quota
To add a user quota:
1. In Command View NAS, click the Storage tab.
2. Under File Volumes, select Quotas.
3. Expand the desired File Volume.
4. Select User Quotas - Default.
5. Select Actions > Add User Quota.
6. Select a Domain Name and User Name from the drop-down lists.
7. Enter the following information.
8. Click OK to add the quota.
Repeat steps 4 through 8 for any additional quotas you want to add.
Note:
quotas.
128
for the soft and hard limits.
Only one grace period can be set per file volume. Therefore, the same grace
— Either check the Use Default Quota Limits box, or uncheck the box and
type in the values of the soft and hard limits. See
on page 126 for an explanation of soft and hard limits.
— Enter the email address of the person to notify when the quota space is
reached.
The grace period for the default user quota is automatically applied to all user
Understanding Quotas
HP StorageWorks NAS 8000 User's Guide