Enabling or Disabling Quotas in a File Volume
To enable or disable a quota:
1. In Command View NAS, click the Storage tab.
2. Under File Volumes, select Quotas to show a list of existing file volumes.
3. Select the file volume you want to enable or disable. If a file volume does not
4. Select Actions > Enable/Disable Quotas.
5. Select OK.
If the file volume is:
Managing User Quotas
To view and edit user quotas on the NAS server:
1. In the Command View NAS, click the Storage tab.
2. Under File Volumes, select Quotas.
3. In the table that appears in the main window, expand the file volume for which
4. Double-click User Quotas - Default to display a list of users who have
You can refresh the information in the table by clicking Actions > Refresh.
have quotas enabled, its icon will be grayed out.
Disabled, enabling may take several minutes as the system gathers usage
information about users and groups.
Enabled, disabling quotas applies to both users and groups.
you want to configure a quota.
settings other than the default. The table listing displays the following
information for each individual user quota:
— User associated with the quota
— Space consumed by the user
— Soft limit of the quota (disk space) that you can temporarily exceed before
cleaning up
— Hard limit of the quota (disk space) that cannot be surpassed by the user
— Grace period of the quota
— Email address of person to notify about exceeding space limitations.
Managing Your Storage
127