Editing A Volume Group - HP StorageWorks 8000 - NAS User Manual

Managing Your Storage

Editing a Volume Group

The Edit Volume Group dialog box lets you extend the size of an existing volume
group or rename it.
To extend a volume group:
1. In Command View NAS, click the Storage tab.
2. Under Volume Groups, select the volume group you want to rename by
3. Select Actions > Edit Selected Volume Group to bring up the Edit Volume
4. Click OK.
Note:
106
clicking the row.
Group dialog box.
a. If you wish to change the volume group name, you can type in the
corrected name in the Volume Group Name field.
b. To add a LUN, select it from the Available LUNs field, click the Add
button. The LUN will move to the Allocated LUNs field.
c. To change your mind about adding a LUN, select it from the Allocated
LUNs field, click the Remove button. The LUN will move back to the
Available LUNs field.
The Remove button will be inactive if there is only one array per volume
group. Also you cannot remove LUNs that are already part of the volume
group.
You cannot de-allocate LUNs that are already a part of the volume group.
HP StorageWorks NAS 8000 User's Guide