HP NAS 8000 System and Hardware Upgrades
Hardware Upgrades and Replacements
This section includes procedures for upgrading and replacing field replaceable
units (FRUs) that require additional configuration of the NAS 8000 solution. It
describes the procedures for:
For information on HP authorized resellers, visit
the how to buy link.
You can purchase additional NAS 8000 hardware and upgrades through the HP
Business Store at http://www.bstore.hp.com.
NAS Server Upgrades
The following upgrades may be made to the server. These upgrades require
additional configuration of the NAS 8000 solution after the hardware installation
is complete:
Adding NICs
The server has one integrated network port, which is dedicated to the Integrated
Lights-Out (iLO). The NAS 8000 solution ships with a dual port NIC, and can
also ship with additional NICs ordered at the time of purchase.
NIC upgrade kits are also available after purchase. Contact your HP sales or
support representative for a list of supported NICs.
To install additional NICs in the NAS server:
1. Power down the system in the following sequence before installing the new
214
NAS server upgrades
Storage array upgrades
Tape library upgrade
UPS upgrade
card:
— NAS server(s)
— Quorum server (for high-availability configurations)
— Array
— FC switch (for high-availability configurations)
— Library
— UPS
http://www.hp.com
and select