Resetting A Group Quota To Default Limits - HP StorageWorks 8000 - NAS User Manual

7. Either check the Use Default Quota Limits box, or uncheck the box and type
8. Set the grace period in increments of days, hours, or minutes.
9. Enter the correct email address for the group.
10. Click OK to save these changes and close the box, or Cancel to revert to the
Note:
period applies to both the default group settings and each group.

Resetting a Group Quota to Default Limits

To set a group's quotas to the default properties:
1. In Command View NAS, click the Storage tab.
2. Under File Volumes, select Quotas.
3. In the table that appears in the main window, select the quota you want to
4. Select Actions > Delete Group Quota.
5. Click Yes to delete the specified properties of the quota and apply the default
Note:
has the default settings instead of group-specific ones. The group will no longer have a
separate listing, but will fall under the category of Group Quotas - Default.
in values for the soft and hard limits.
previous settings.
Only one grace period can be set per file volume. Therefore, the same grace
reset by clicking the row.
properties instead.
When you delete a group quota, the group still has access to the storage, but
Managing Your Storage
133