Editing An Ha Configuration - HP StorageWorks 8000 - NAS User Manual

7. To add nodes to the cluster:
8. Click OK to apply the settings.

Editing an HA Configuration

Note:
Note:
To edit your HA configuration:
1. In Command View NAS, click the Configuration tab.
2. Under High Availability, select HA Properties.
3. Select Actions > Edit HA Configuration
4. Change to a different (existing) cluster by typing the name in the Cluster
5. Change to a different (existing) quorum server by typing the simple name (not
6. Select the Heartbeat NIC from the list of available NICs and use the Add and
7. Click OK.
a. Highlight any node name already in the field and type in the name of the
cluster you wish to add to the list.
b. Select the Add Item to List button to add that node.
Applies to high-availability NAS solutions only.
The cluster must be stopped before editing an HA configuration.
Name field.
the fully qualified domain name) in the Quorum Server Name field.
Remove buttons to move the NICs from one list to the other.
Configuring Your System and Network
71