Storage Array Upgrades
Adding Disks
To increase capacity, additional disks may be added to the storage array in the
NAS 8000 solution. Instructions for these procedures appear in the HP VA7100
User and Service Guide (see http://www.hp.com/support/va7100). The EMA
array is supported for SAN configurations. White papers are available for the
EMA array. Please contact your HP support representative for information on
supported configurations.
Modifying Storage Settings
The storage space on the new disks must be made accessible to the server and
users. This can be done in two ways:
Figure 27: Expanding a Volume Group
Expanding an existing volume group to include the new LUN.
HP NAS 8000 System and Hardware Upgrades
217