View Firmware Version - HP StorageWorks 1/16 Tape SuperLoader Manual

Table 4: SuperLoader Status Messages
Magazine
L=
R=
L= (no
R= (no
Loader
ONLINE
OFFLINE
Drive
ONLINE
OFFLINE
Mode
Random
Mixed
Sequential
Seq Cycle Mode
NOTE: ISVs support different modes of operation. Be sure your SuperLoader is set to
the correct mode of operation. The SuperLoader defaults to Random mode. See
"Control Mode" in Chapter 2 for additional information.
Barcode Reader
No

View Firmware Version

To view the firmware version:
1. On the main menu, scroll to Status. (See Figure 55.)
2. Press Enter.
3. On the Status submenu, scroll to SuperLoader Info. (See Figure 56.)
4. Press Enter.
5. On the SuperLoader Info submenu, scroll to Version. (See Figure 57.)
1/16 Tape SuperLoader Reference Guide
The left magazine is present.
The right magazine is present.
) The left magazine is not present.
) The right magazine is not present.
The SuperLoader SCSI connection is active.
The SuperLoader SCSI connection is not active.
The drive SCSI connection is active.
The drive SCSI connection is not active.
Default. The SuperLoader is operating in Random mode.
The SuperLoader is operating in Mixed mode.
The SuperLoader is operating in Sequential mode.
The SuperLoader is operating in Seq Cycle Mode.
A barcode reader is present.
A barcode reader is not present.
SuperLoader Operation
67