HP StorageWorks 8000 - NAS User Manual page 73

boots. When you modify the clustering services auto-start setting, the setting will
be mirrored on the other cluster nodes. See
page 53 if you want to change the auto-start feature.
The Start/Stop Clustering Services screen allows you to turn clustering
capabilities on or off. You must stop clustering services to change configuration
information on your NAS server. Once you stop clustering services, you will be
able to access your data through the physical IP address but not the virtual IP
address.
Caution: All current connections to CIFS and NFS are lost when you stop
clustering services.
To start or stop clustering services:
1. In Command View NAS, click the Configuration tab.
2. Under High Availability, select HA Properties.
3. Select:
— Actions > Start Cluster. You cannot select this item if the cluster is
already running.
— Actions > Stop Cluster. You cannot select this item if the cluster is
already stopped.
Configuring Your System and Network
Using the Configuration Wizard on
73