Integrating with Network Backup Applications
Using Veritas NetBackup
NetBackup is a network based, backup and recovery tool.
You can use NetBackup on either a Windows NT or UNIX system connected to
your NAS server.
Note:
the NAS server.
NetBackup for Windows
1. Select Start > Programs > Veritas NetBackup > NetBackup Admin.
2. Select Backup, Archive, & Restore.
3. Click Select for Backup.
4. Expand the network and find the NAS server. Expand the volumes. You can
5. Select a volume and click Backup > Start Backup of Marked Files.
6. Select your backup options as you normally would, then start the backup.
NetBackup for UNIX
Before you can backup with NetBackup, you must:
To back up files from the NAS server using NetBackup for UNIX:
1. Execute /usr/openv/netbackup/bin/xnb.
2. Verify that the Class Attributes for the backup has the Follow NFS option
3. Select Backup, Archive, & Restore.
4. Click Select for Backup.
5. Expand the network and find the NAS server. Expand the volumes. You can
196
When you back up with a remote server, you cannot use a tape device local to
only back up Windows shared volumes.
Mount on your local host machine the NAS server volumes you want to back
up.
Configure the NAS server so that the UNIX backup system is set to a trusted
host on the NAS server.
selected.
only back up NFS mounted volumes.