Integrating with Network Backup Applications
Using Computer Associates ARCserve 2000
ARCserve 2000 is a backup and restore management solution developed to
function across various platforms. Check the manual that came with your software
to see what platforms your edition of ARCserve 2000 supports.
You can use ARCserve 2000 on a Windows NT server connected to your NAS
server.
Note:
the NAS server.
ARCserve 2000 for Windows NT
To back up files from the NAS server using ARCserve 2000 for Windows NT:
1. Open ARCserve 2000 for Windows NT.
2. Select Manager > Quick Access > Backup Manager.
3. Select Network > Microsoft Windows Network > Domain Name > NAS
Figure 22: ARCserve Backup
192
When you back up with a remote server, you cannot use a tape device local to
Device. In the figure below, the Domain Name is MB, and the NAS Device is
NAS_A.