HP StorageWorks 8000 - NAS User Manual page 76

Configuring Your System and Network
4. Select either:
Note:
Manage Domain Controller dialog box.
Select either Broadcast Domain Controllers or Specify PDC. If desired, you can
also include a list of backup domain controllers that are used if the primary domain
controller becomes unavailable. There is no limit to the number of backup
controllers that you can supply.
Click OK.
5. Click OK. The NAS server attempts to join the domain. The NAS server will
Note:
joined, you might need to reset or remove and add the NAS server on the Windows
domain controller that the NAS server will attempt to rejoin.
76
— Share Level Security. Specify the Workgroup to which the NAS server
belongs.
— User Level Security. Enter the following information (if necessary, get it
from your system administrator):
— Domain name. The system administrator must have already created
an account for the NAS server in the domain you choose to join. This
is on the planning worksheet in your SIM binder.
— Correct User Name and Password for the administrator of the
primary domain controller (PDC). By default, the system
automatically broadcasts to identify the PDC. If you want to change
this, select the Advanced button.
For Advanced user level security, select the Advanced button to access the
fail in its attempt to join the domain if the Windows domain controller does
not have an account for the NAS server.
If you need to rejoin a Windows domain that the NAS server had previously