Specifications-Related; The Breakage Of Copy Tray Hooks Due To An Overloading Of Output Paper (Copy Tray-P1/R1/R2/Output Tray-A1 ) - Canon imagePRESS C850 Series Troubleshooting Manual

Specifications-Related

The breakage of copy tray hooks due to an overloading of output
paper (Copy Tray-P1/R1/R2/Output Tray-A1 )
[Symptom]
The copy tray hooks (claws) [1] may break on an engine whose serial number is earlier than the following countermeasure cut-
in serial numbers in factory.
[Cause]
An overloading of output paper overcomes the designed strength of copy tray, and this induces the above mentioned symptom.
The said symptom would not occur in the use where the stack volume in the tray is within the specification.
[Reference] The specifications of number of sheets stacked in the copy tray for each basis weight for paper is as per the followings:
2
- 80 g/m or less: 250 sheets (50 for long strips)
2
-128 g/m 120 sheets (30 for long length papers)
2
-105 g/m 190 sheets
2
-220 g/m 90 sheets
2
-256 g/m 70 sheets
2
-300 g/m 60 sheets (20 for long length papers)
[Service work]
When the aforementioned symptom has occurred, replace the copy tray 1 [1] with new type which changed shape of the hooks
(claws) and enhanced strength against weight.
Main body
iR-ADV C7000/C7200/C9000/C9200 Series
image PRESS C800/C650 Series
iR-ADV C7500 Series
image PRESS C850 Series
Figure [A] is the previous copy tray 1 and [B], the new type copy tray 1.
Model
Copy Tray P1
Output Tray A1
Copy Tray R1
Copy Tray R2
72
Part number of new type
copy tray 1
FC9-6183-010
FE2-0250-020
FE4-5914-010
FE4-5914-010