Turning off the designated default output bin for copy jobs
If the MBM is connected to an MFP, the face-down bin 1 is designated for regular copy jobs in
the following operation modes:
●
●
●
If the copy bin is turned off, regular copy jobs are sent to face-down bins 1 through 8 for the
Stacker, Job Separator, and Sorter/Collator modes.
Note
This option does not apply to the Mailbox mode. When the Mailbox mode is used, the face-down
bin 1 is always used for copy jobs.
HP LaserJet 9040/9050 series printers
1
2
3
4
HP LaserJet 9040mfp/9050mfp/9500mfp
1
2
3
4
5
12 2 Configuring the MBM for your work environment
Stacker
Job Separator
Sorter/Collator
Use
or
to scroll to CONFIGURE DEVICE, and then press
Use
or
to scroll to MBM-8 CONFIG, and then press
Use
or
to scroll to COPIER BIN, and then press
Use
or
to scroll to the option to turn the copy bin on or off, and then press
Press the
button.
M
ENU
Scroll to and touch CONFIGURE DEVICE.
Scroll to and touch MBM-8 CONFIG.
Scroll to and touch COPIER BIN.
Scroll to the option to turn the copier bin on or off, and then touch OK.
.
.
.
.
ENWW