Installing A 2.5-Inch Hot-Swap Hard Disk Drive - Lenovo THINKSERVER 3822 Hardware Maintenance Manual

3. Press down on the release latch to open the drive handle; then, pull the drive
4. If you are instructed to return the hot-swap hard disk drive, follow all packaging

Installing a 2.5-inch hot-swap hard disk drive

The following notes describe the types of hard disk drives that the server supports
and other information that you must consider when you install a hard disk drive:
v Depending on the model, the server supports up to eight or up to 16 2.5-inch
v The hot-swap bays are arranged horizontally in the top and bottom hard disk
v For a list of supported optional devices for the server, see
v Inspect the drive and drive bay for signs of damage.
196
ThinkServer TD200x Types 3719, 3821, 3822, and 3823: Hardware Maintenance Manual
out of the drive bay.
instructions, and use any packaging materials for shipping that are supplied to
you.
SAS hot-swap hard disk drives in the hot-swap bays.
drive cages:
– On models with eight hard disk drives, the top bays are numbered 0 through 7
(from right to left)
– On models with 16 hard disk drives, the top bays are numbered 0 through 7
(from right to left) and the bottom bays are 8 through 15 (from right to left)
0
Bay 0
1
Bay 1
2
Bay 2
3
Bay 3
4
Bay 4
5
Bay 5
6
Bay 6
7
Bay 7
http://www.lenovo.com/thinkserver.
8
Bay 8
9
Bay 9
10
Bay 10
11
Bay 11
12
Bay 12
13
Bay 13
14
Bay 14
15
Bay 15