The Multifeeder Assembly Rack Plate; Adjusting The Left/Right Registration - Canon NP6218 Service Manual

CHAPTER 5 PICK-UP/FEEDING SYSTEM

9. Adjusting the Left/Right Registration

If the right/left registration is not correct when copies are made using the multifeeder,
loosen the screw
10. Points to Note When Attaching the Multifeeder Assembly Rack Plate
Attach the rack plate of the multifeeder to the pulley while both its right and left are
fully open.
5-30
, and adjust the position of the tray.
Figure 5-726
COPYRIGHT © 1997 CANON INC. CANON NP6218 REV. 0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)