Detaching/Attaching The Pick-Up Roller; Detaching The Pick-Up Clutch - Canon NP6218 Service Manual

CHAPTER 5 PICK-UP/FEEDING SYSTEM
E. Cassette Feeding Module
1. Detaching the Copier from the Cassette Feeding Module
1) Disconnect the copier's power plug.
2) Disconnect the connector
3) Hold the copier's grips, and detach the copier from the cassette feeding module.

2. Detaching/Attaching the Pick-Up Roller

See p. 5-14 "1. Detaching the Pick-Up Roller Unit", p. 5-17 "2. Detaching the Pick-Up
Roller" and p. 5-18 "3. Points to Note When Attaching the Pick-Up Roller."

3. Detaching the Pick-Up Clutch

1) Detach the pick-up drive unit. (See p. 7-14 "1. Detaching the Pick-Up Drive Unit.")
2) Detach the cassette motor. (See p. 7-15 "2. Detaching the Cassette Motor.")
3) Remove the three screws
detach the pick-up clutch
5-36
of the cassette feeding module.
Figure 5-737
, and detach the bushing
.
Figure 5-738
COPYRIGHT © 1997 CANON INC. CANON NP6218 REV. 0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
and side plate ; then,