The Blank Shutter Fails To Move; The Photosensitive Drum Fails To Rotate - Canon NP6218 Service Manual

CHAPTER 10 TROUBLESHOOTING

18. The blank shutter fails to move.

Cause Step
Lens motor 1
Blank shutter 2
drive assembly
Blank shutter 3
cable

19. The photosensitive drum fails to rotate.

Cause Step
1
Drum cartridge 2
Belt 3
Main drive
assembly
10-72
Checks
Does the lens move?
Is the drive of the lens motor
transmitted to the gear of the
blank drive assembly?
Is the blank shutter cable routed
correctly?
Checks
Is E010 indicated?
Re-insert the drum cartridge. Is
the problem corrected?
Is the belt fro drive routed correctly?
COPYRIGHT © 1997 CANON INC.
Results
NO
NO
NO
Results
YES
YES
NO
YES
CANON NP6218 REV. 0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
Action
See "The lens fails to
move."
Make corrections so that
the drive is transmitted.
Re-route the cable.
Action
See "E010."
End.
Re-route the belt.
Detach the main drive
assembly; correct or
replace pats as
necessary.