6) Remove the three screws
7) Disconnect all connectors from the composite power supply PCB.
8) Remove the screw
guide
from the power supply side plate.
9) Remove the screw
COPYRIGHT © 1997 CANON INC.
, and detach the power cord mount
Figure 7-227
, and detach the grounding wire
Figure 7-228
, and detach the composite power supply PCB
Figure 7-229
CANON NP6218 REV. 0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 7 EXTERNALS/AUXILIARY MECHANISMS
; then, detach the harness
.
.
7-19