Canon NP6218 Service Manual page 72

6) Disconnect the two connectors
7) Remove the two screws
8) Remove the two screws, and disconnect the connector
motor .
Caution:
Disconnect the connector
harness and driver will come into contact with each other.
COPYRIGHT © 1997 CANON INC.
from the copier's rear.
Figure 3-418
, and detach the lens drive unit
Figure 3-419
first before removing the screw
CANON NP6218 REV. 0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 3 EXPOSURE SYSTEM
.
; then, detach the lens
; otherwise, the
3-19