Controlling The Fixing Film Motor - Canon NP6218 Service Manual

Hide thumbs Also See for NP6218:

Table of Contents

CHAPTER 6 FIXING SYSTEM

2. Controlling the Fixing Film Motor

The fixing film motor is a stepping motor, and is rotated by the drive signal FMD and

pulse signals FFA, FFA*, FFB, and FFB*.

When FMD is '1', the drive voltage FFCA and FFBC are imposed; the motor starts

to rotate when pulses are applied to each phase in specific sequence.

The motor is rotated in reverse by applying these pulses in reverse order.

Microprocessor

DC controller PCB

Figure 6-109

CANON NP6218 REV. 0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)

Table of Contents