Mirrors (Optical Length Of No 1, 2, And 3 Mirrors) - Canon NP6218 Service Manual

CHAPTER 3 EXPOSURE SYSTEM
5. Adjusting the Position of the Mirrors (optical length of No. 1, 2, and 3 mirrors)
1) Keep the mirror positioning tool handy.
(See "3. Assembling the Mirror Positioning Tool.")
2) Move the No. 1 mirror mount toward the front, and align the angular hole in the front
side plate and the cable fixing screw
3) Loosen the set screw on the pulley.
4) Set the mirror positioning tool
(both front and rear).
3-16
(front)
Figure 3-412
to the No. 1 mirror mount and the No. 2 mirror mount
Mirror positioning tool (front)
Figure 3-413
COPYRIGHT © 1997 CANON INC.
.
(rear)
Mirror positioning tool (rear)
(front)
(front)
CANON NP6218 REV. 0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)