E. Fixing System
1. Points to Note When Attaching the Fixing Film
Orient it so that the cut-off is toward the rear.
Make sure that the end toward the front is along the middle groove.
2. Points to Note When Attaching the Heater Connector
•
When attaching the heater connector to the fixing heater, take care not to damage
the heater.
•
When tightening the screw, hold the connector making sure that both its top and
bottom are free of pressure; do not tighten the screw excessively.
COPYRIGHT © 1997 CANON INC.
Film end aligned.
Figure 10-234
Screw
Figure 10-235
CANON NP6218 REV. 0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 10 TROUBLESHOOTING
Heater connector
10-27