Composite Power Supply Pcb - Canon NP6218 Service Manual

CHAPTER 7 EXTERNALS/AUXILIARY MECHANISMS
G. Composite Power Supply PCB
1. Detaching the Composite Power Supply PCB
1) Detach the lower rear cover and the delivery cover.
2) Remove the screw
3) Remove the screw
4) Remove the screw
5) Disconnect the AC connector
wire .
7-18
, and detach the switch support plate
, and detach the power cord cover 1
Figure 7-225
, and shift the power cord cover 2
, and remove the screw
Figure 7-226
COPYRIGHT © 1997 CANON INC.
.
CANON NP6218 REV. 0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
.
.
to detach the grounding