Attaching The Drum Unit - Canon NP6218 Service Manual

D. Attaching the Drum Unit
Step
1 Unpack the drum unit, and
remove the light-blocking
sheet.
2 Remove the primary charging
roller releasing spacer.
3 Set the drum unit to the copier,
and fix it in position using the
knob used to keep the dummy
drum.
4 Fill out the label, and attach it
to the drum unit cover.
COPYRIGHT © 1997 CANON INC.
Work
CANON NP6218 REV. 0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
Check/Remarks
Releasing spacer
Take care not to damage the surface of the drum
and not to touch the primary charging roller.
Be sure to insert the drum unit straight along the
copier's rail.
CHAPTER 8 INSTALLATION
Releasing spacer
8-9