Detaching The Blank Exposure Lamp - Canon NP6218 Service Manual

4. Detaching the Blank Exposure Lamp

1) Detach the blank exposure assembly. (See "3. Detaching the Blank Exposure
Assembly on p. 4-34.")
2) Remove the four screws
3) Disconnect the connector
COPYRIGHT © 1997 CANON INC.
, and disconnect the connector
Figure 4-310
.
Figure 4-311
CANON NP6218 REV. 0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 4 IMAGE FORMATION SYSTEM
.
4-35