CHAPTER 10 TROUBLESHOOTING
VII. SERVICE MODE
A. Outline
The copier's service mode may be classified into the following six:
B. Using Service Mode
1. Activating Service Mode
1) Open the front door, and insert the door switch actuator.
•
If you want to make checks for I/O display mode or the like while making copies,
set the copy mode.
2) Press the service mode switch (SW302) on the DC controller with hex key.
•
The copy count indicator indicates [1].
•
While service mode is activated, the copy density indicator LED indicates the
position of the fixing belt.
•
A press on the reset key de-activates service mode.
10-94
Item
[
]
control display mode
1
[
]
I/O display mode
2
[
]
adjustment mode
3
[
]
operation/inspection mode
4
[
]
specification mode
5
[
]
counter mode
6
Table 10-701
Figure 10-701
COPYRIGHT © 1997 CANON INC.
Description
CANON NP6218 REV. 0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)