Positioning The Left/Right Margin - Canon NP6218 Service Manual

CHAPTER 4 IMAGE FORMATION SYSTEM
7. Routing the Blanking Cable

8. Positioning the Left/Right Margin

Turn the blanking shutter adjusting screw on the copier's front side plate shown in
Figure 4-316 so that the standards are met.
clockwise turn
counterclockwise turn
a full turn
4-38
Put the spring on the outside.
Wind 3.5 items
Figure 4-315
moves the margin to the front.
moves the margin to the rear.
moves about 1 mm.
Figure 4-316
COPYRIGHT © 1997 CANON INC.
Slide shutter (rear)
Slide shutter (front)
CANON NP6218 REV. 0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)