Image Formation System; Positioning The Blank Shutter Solenoid - Canon NP6218 Service Manual

C. Image Formation System

1. Positioning the Blank Shutter Solenoid

Adjust the position of the blank shutter solenoid so that the bottom A is 9.5 ±0.5 mm
on both sides when the solenoid is moved in the direction of ON; try not to force down
the shutter.
After adjustments, make sure that the solenoid moves smoothly.
COPYRIGHT © 1997 CANON INC.
Figure 10-223a
Figure 10-223b
CANON NP6218 REV. 0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 10 TROUBLESHOOTING
10-21