Fans; Detaching The Exhaust Fan - Canon NP6218 Service Manual

CHAPTER 7 EXTERNALS/AUXILIARY MECHANISMS
C. Fans

1. Detaching the Exhaust Fan

1) Open the front door.
2) Pull the copier's open/close lever to open the copier.
3) Detach the DC controller PCB. (See "1. Detaching the DC Controller PCB" on p. 7-17.)
4) Remove the screw
Figure 7-208
5) Pull out the exhaust fan assembly
6) Remove the four screws
7-10
at the copier's rear, and remove the two screws
Figure 7-210
, and detach the exhaust fan
Figure 7-211
COPYRIGHT © 1997 CANON INC.
Figure 7-209
toward the front while supporting it.
CANON NP6218 REV. 0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
at the front.
.