Assembly (Paper Guide Plate Cam) - Canon NP6218 Service Manual

Hide thumbs Also See for NP6218:

Table of Contents

CHAPTER 5 PICK-UP/FEEDING SYSTEM

8. Positioning the Multifeeder Assembly (paper guide plate cam)

Temporarily fix the screw equipped with a hex nut on the spring clutch assembly, and

rotate the control ring. Make adjustments so that the hole in the cam and the hole in the

multifeeder drive unit match as shown in Figure 5-725 when the claw is engaged with the

solenoid plate; then, fix in position.

Figure 5-725

CANON NP6218 REV. 0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)

Chapters

Table of Contents