Paper Eject Roller; Removing The Y-D Shaft - Brother LX-200 Service Manual

3.10 Paper Eject Roller

3.10.1

Removing the Y-D Shaft

1. Remove the left and right paper eject sub-roller springs.
2. Remove the left and right Y-extension springs L/R.
3. Pull out the Y-gear 40-20 from the shaft and remove the Y-driving gear. Take care
not to damage the gear hook by opening too far while removing the Y-gear 40-20.
4. Push the Y-D shaft to the right, then remove from the left.
Y-extension spring L
5. Remove the Y-cutter cams L/R from the removed Y-D shaft.
Paper eject sub-roller springs
Y-D shaft
Y-extension spring R
Fig. 3.10-1 Removing the Y-D Shaft (1)
Y-D shaft
Y-cutter cam L
Y-cutter cam R
Fig. 3.10-2 Removing the Y-D Shaft (2)
3-28
Y-driving gear
Y-gear 40-20