[5] Lower the roller holder assy and push the set buttons in the direction of the arrows to
lock the roller holder assy in position.
Fig. 6.2-5
[6] Close the top cover.
Fig. 6.2-6
[7] Turn on the power switch and press the Feed button to feed out some sheet and
remove the slackness in the sheet. Hold down the Feed button until the edge of the
sheet reaches the eject gate.
[8] Press the Cut button to cut off the end of the sheet fed out to remove the slackness.
Replacing the Cartridge (5/6)
Replacing the Cartridge (6/6)
6-11