Disassembling The Sensor Frame - Brother LX-200 Service Manual

3.8.3

Disassembling the Sensor Frame

1. Disengage the hooks on FPC holder A from the cut-outs in the sensor frame. Move
the FPC holder A in the direction of the arrow to remove it.
2. Release the FPC holder B from the boss hole in the sensor frame. Move the FPC
holder B in the direction of the arrow to remove it.
3. Remove the paper sensor harness assy (flat cable) from the FPC holder A and FPC
holder B.
4. Remove the sensor crank protect film from the sensor frame, if it requires replacing.
FPC holder A
Paper sensor harness assy
Sensor frame
Cut-out
Boss hole
Hook
Fig. 3.8-3 Disassembling the Sensor Frame
3-24
Sensor crank
protect film
FPC holder B