Installing The Paper Feed Sub-Roller Assy - Brother LX-200 Service Manual

4.10.2 Installing the Paper Feed Sub-roller Assy

1. Hold the paper feed sub-roller assy with the semicircular end to the right. Push
through the left and right rod holders and engage the paper feed roller grooves in the
bearings.
2. Align the lower boss of the left and right rod holders with the slots in the chassis L/R.
3. Attach the left and right paper feed shaft spring (L)/R.
4. Align the gear 16 hook with the semicircular end of the paper feed sub-roller assy
and push the gear until the hook engages.
Paper feed shaft spring R
Paper feed sub-roller assy
Rod holders
Fig. 4.10-3 Installing the Paper Feed Sub-roller Assy (1)
Fig. 4.10-4 Installing the Paper Feed Sub-roller Assy (2)
4-18
Bearings
Paper feed sub-roller assy
Gear 16 hook
Paper feed shaft spring Slot