Disassembling The Y-Ca Chassis Assy - Brother LX-200 Service Manual

3.7.2

Disassembling the Y-CA Chassis Assy

1. Remove the pulley holder screw. Move the Y-CA pulley holder in the direction of
arrow A and remove the Y-CA timing belt.
2. Move the Y-CA pulley holder in the direction of arrow B and remove it.
3. Move the Y-CA idle pulley in the direction of arrow B and remove it.
4. Remove the Y-CA driving pulley ring and pull off the Y-CA driving pulley.
5. Remove the two Y-CA motor screws and remove the Y-CA motor.
Y-CA driving pulley ring
Y-CA driving pulley
Y-CA motor
screws
Y-CA motor
Anti-static brush
Fig. 3.7-2 Disassembling the Y-CA Chassis Assy
3-20
Y-CA timing belt
Y-CA idle pulley
"A"
Y-CA pulley holder
Y-CA pulley
holder screw
"B"