User’s Guide LX-570 How to Use the LX-570 Insert the item: About the LX-570 Cutter Top Cover Feed Deck Cut: Cutter bar Exit area Knob Notes: Before using, remove the protective tape Latch ( and other packaging materials under the top cover.
Notes: When placing a partially-used How to Change the Cartridge cartridge back in the machine, be sure the material does not adhere to the Remove the cartridge: Insert a cartridge: cartridge itself. When removing a used cartridge whose material has wrapped around the rollers, remove the cartridge and pull the material from the rollers.
Warnings: Cautions: Once you start feeding an item, do not try to back it out by turning the knob in the opposite direction. Always feed items straight, not at an angle. Warnings & Cautions...
Troubleshooting Tips Solution Problem Maintaining the LX-570 To clean the cutter area: To clean the rollers:...