Paper Eject Roller; Removing The Paper Eject Roller Unit - Brother LX-300 Service Manual

3.13 Paper Eject Roller

3.13.1 Removing the Paper Eject Roller Unit

1. Push down the Paper eject shaft holder until they becomes free.
2. Push the Paper eject roller toward the left and remove it from the right end.
3. Remove the Paper eject sub-roller in exactly the same manner as the Paper eject
roller: move it toward the left then remove it from the right end.
4. Remove the Paper eject roller bearing hook, then remove the Paper eject roller
bearing.
Paper eject sub roller
Fig. 3.13-1 Removing the Paper Eject Roller Unit 1
Paper eject roller bearings
Fig. 3.13-2 Removing the Paper Eject Roller Unit 2
Hooks
3-30
Paper eject roller
Paper eject shaft holder