Brother LX-200 Service Manual page 26

2.Lift the rear of the bottom cover in the direction of arrow B while pushing it in the
direction of arrow A. Release the four hooks at the rear face.
3.Push the body cover in the directions indicated by the arrows C to release the
hook at the left and right side.
4.Release the two hooks from the front of the body cover.
Hook
"A"
Body cover
"C"
Side hook
Fig. 3.3-8
5.Disconnect the switch harness assy (white CN1) from the main PCB and remove
the body cover. (The body cover switch PCB is connected to the main PCB of
bottom cover via the switch harness assy.)
Fig. 3.3-9
"B"
"C"
Rear hooks
Front hooks
Removing the Body Cover (2)
Removing the Body Cover (3)
3-6
Bottom cover
Switch harness assy